DescriptionThese PVC fully coated red guantlets produced by Delta Plus are 27 cm total length and are 0.90 mm thick. The gloves have interlock cotton lining with a 100% cured and vulcanised PVC outer.
- NOTE; If handling hazardous materials, chemicals or other liquids check if the gloves being used meet with the protection needed. Chemical Finder List is Here
- Level 3 – Abrasion
- Level 1 – Cut Resistance
- Level 3 – Tear Resistance
- Level 1 – Puncture
Agriculture / Green areas Heavy industry Mining
REGULATION (EU) 2016/425
EN420:2003+A1:2009 General requirements
|5||Dexterity (from 1 to 5)|
EN388:2016 Protective gloves against mechanical Risks (Levels obtained on the palm)
|3||Resistance to abrasion (from 1 to 4)|
|1||Resistance to cutting (from 1 to 5)|
|3||Resistance to tear (from 1 to 4)|
|1||Resistance to puncture (1 to 4)|
|X||Resistance to cutting by sharp objects (TDM EN ISO 13997) (from A to F)|
EN ISO 374-1:2016 Protective gloves against dangerous chemicals and micro- organisms – Part 1: Terminology and performance requirements for chemical risks.
|TYPE||C||Type C – Water and air tightness according to EN374-2:2014. Permeation resistance to at least 1 chemicals at level 1 according to EN16523-1: 2015 (from 1 to 6).|
|.||Determination of resistance to degradation by chemicals according to EN374-4: 2013. Part 4: Determination of resistance to degradation by chemicals.|
|K||6 > 480 mn||Caustic soda 40% (K) CAS 1310-73-2|
EN ISO 374-5:2016 Protective gloves against dangerous chemicals and micro-organisms – Part 5: Terminology and performance requirements against micro- organisms risks.
|BACTERIA + FUNGI||.||BACTERIA + FUNGI : Water and air tightness according to EN374-2:2014.|