Description
These chemical PVC fully coated red guantlets produced by Delta Plus are 60 cm total length and are 1.20-1.40 mm thick. The gauntlets have PVC on interlock cotton lining with a 100% PVC outer. The material is resistant to oils, chemicals and petroleum derivatives in addition to having good resistance to abrasion. The 60 cm length gives complete arm protection when it is needed from liquids.- NOTE; If handling hazardous materials, chemicals or other liquids check if the gloves being used meet with the protection needed. Chemical Finder List is Here
- Level 4 – Abrasion
- Level 1 – Cut Resistance
- Level 3 – Tear Resistance
- Level 1 – Puncture






REGULATION (EU) 2016/425
EN420:2003+A1:2009 General requirements
5 | Dexterity (from 1 to 5) |

EN388:2016 Protective gloves against mechanical Risks (Levels obtained on the palm)
4 | Resistance to abrasion (from 1 to 4) | |
1 | Resistance to cutting (from 1 to 5) | |
3 | Resistance to tear (from 1 to 4) | |
1 | Resistance to puncture (1 to 4) | |
X | Resistance to cutting by sharp objects (TDM EN ISO 13997) (from A to F) |

EN ISO 374-1:2016 Protective gloves against dangerous chemicals and micro- organisms – Part 1: Terminology and performance requirements for chemical risks.
TYPE | B | Type B – Water and air tightness according to EN374-2:2014. Permeation resistance to at least 3 chemicals at level 2 according to EN16523-1: 2015 (from 1 to 6). |
. | Determination of resistance to degradation by chemicals according to EN374-4: 2013. Part 4: Determination of resistance to degradation by chemicals. | |
A | 4 > 120 mn | Méthanol (A) CAS 67-56-1 |
K | 6 > 480 mn | Caustic soda 40% (K) CAS 1310-73-2 |
L | 6 > 480 mn | Sulphuric acid 96 % (L ) CAS 7664-93-9 |

EN ISO 374-5:2016 Protective gloves against dangerous chemicals and micro-organisms – Part 5: Terminology and performance requirements against micro- organisms risks.
BACTERIA + FUNGI | . | BACTERIA + FUNGI : Water and air tightness according to EN374-2:2014. |
Reviews
There are no reviews yet.