Delta Plus TOUTRAVO VE509 Neoprene Gloves 30 cm 12" - 09

These fully coated black VE509 neoprene gloves produced by Delta Plus are 30 cm total length and are 0.75 mm thick.  The gloves have cotton flocklining with a 100% neoprene outer and full 100% flocking inner.  This gives absorption of perspiration for comfort.  In addition, these neoprene gloves have embossed structure on palm and fingers along with good grip of handled objects.  The gloves are versatile and highly efficient material against heat, detergents, alcohols, chemicals, greases and hydrocarbons.

• NOTE; If handling hazardous materials, chemicals or other liquids check if the gloves being used meet with the protection needed.   

• Level 3 - Abrasion
• Level 1 - Cut Resistance
• Level 0 - Tear Resistance
• Level 1 - Puncture
• Level X - Resistance to cutting by sharp objects

Light industry                           Oil / Gas

 

EN388:2016 Protective gloves against mechanical Risks (Levels obtained on the palm)

	3	Resistance to abrasion (from 1 to 4)
	1	Resistance to cutting (from 1 to 5)
	1	Resistance to tear (from 1 to 4)
	0	Resistance to puncture (1 to 4)
	X	Resistance to cutting by sharp objects (TDM EN ISO 13997) (from A to F)

 

• EN ISO 374-1:2016 Protective gloves against dangerous chemicals and micro- organisms - Part 1: Terminology and performance requirements for chemical risks. 

  TYPE	A	Type A - Water and air tightness according to EN374-2:2014. Permeation resistance to at least 6 chemicals at level 2 according to EN16523-1: 2015,
  	.	Determination of resistance to degradation by chemicals according to EN374-4: 2013. Part 4: Determination of resistance to degradation by chemicals.
  A	3 > 60 mn	Méthanol (A) CAS 67-56-1
  K	6 > 480 mn	Caustic soda 40% (K) CAS 1310-73-2
  L	4 > 120 mn	Sulphuric acid 96 % (L ) CAS 7664-93-9
  M	6 > 480 mn	Nitric acid 65% (M) CAS 7697-37-2
  N	5 > 240 mn	Acetic acid 99% (N) CAS 64-19-7
  O	3 > 60 mn	Ammonium hydroxide 25% (O) CAS 1336-21-6
  P	6 > 480 mn	Hydrogen peroxide 30% (P) 7722-84-1
  T	6 > 480 mn	Formaldehyde 37% (T) CAS 50-00-0

   

  

• BACTERIA + FUNGI

  .

  BACTERIA + FUNGI : Water and air tightness according to EN374-2:2014.

  EN ISO 374-5:2016 Protective gloves against dangerous chemicals and micro-organisms - Part 5: Terminology and performance requirements against micro- organisms risks.