Konig 60CM Black Extra-Heavyweight Chemical Resistant Rubber Gauntlet.

These fully coated black long size 10/11 reinforced latex gloves produced by Delta Plus are 60 cm total length and are 1.15 mm thick.  The gloves are chlorinated inside and out with 100% natural latex.  With giving enhanced protection of the arms means these gloves are ideal where the arms may need to go into liquids or to be protected against splashes. 

• NOTE; If handling hazardous materials, chemicals or other liquids check if the gloves being used meet with the protection needed.  

• Level 4 - Abrasion
• Level 1 - Cut Resistance
• Level 2 - Tear Resistance
• Level 1 - Puncture
• Level X - Resistance to cutting by sharp objects

Biological chemical particles 
Wearing 
Construction / Civil engineering
Heavy industry
 REGULATION (EU) 2016/425

 

EN420:2003+A1:2009 General requirements   

5

Dexterity (from 1 to 5)

EN388:2016 Protective gloves against mechanical Risks (Levels obtained on the palm)

	4	Resistance to abrasion (from 1 to 4)
	1	Resistance to cutting (from 1 to 5)
	2	Resistance to tear (from 1 to 4)
	1	Resistance to puncture (1 to 4)
	X	Resistance to cutting by sharp objects (TDM EN ISO 13997) (from A to F)

EN407:2004 Protective gloves against Heat & Fire risks (X = Unrealized test)

	X	Resistance to flammability (from 1 to 4)
	2	Resistance to contact heat (from 1 to 4)
	X	Resistance to convective heat (from 1 to 4)
	X	Resistance to radiant heat (from 1 to 4)
	X	Resistance to small projections of liquid metal (from 1 to 4)
	X	Resistance to large projections of molten metal (from 1 to 4)

EN ISO 374-1:2016 Protective gloves against dangerous chemicals and micro- organisms - Part 1: Terminology and performance requirements for chemical risks.   

TYPE	A	Type A - Water and air tightness according to EN374-2:2014. Permeation resistance to at least 6 chemicals at level 2 according to EN16523-1: 2015,
	.	Determination of resistance to degradation by chemicals according to EN374-4: 2013. Part 4: Determination of resistance to degradation by chemicals.
A	6 > 480 mn	Méthanol (A) CAS 67-56-1
K	6 > 480 mn	Caustic soda 40% (K) CAS 1310-73-2
L	4 > 120 mn	Sulphuric acid 96 % (L ) CAS 7664-93-9
M	6 > 480 mn	Nitric acid 65% (M) CAS 7697-37-2
N	5 > 240 mn	Acetic acid 99% (N) CAS 64-19-7
O	3 > 60 mn	Ammonium hydroxide 25% (O) CAS 1336-21-6
P	6 > 480 mn	Hydrogen peroxide 30% (P) 7722-84-1
T	6 > 480 mn	Formaldehyde 37% (T) CAS 50-00-0

EN ISO 374-5:2016 Protective gloves against dangerous chemicals and micro-organisms - Part 5: Terminology and performance requirements against micro- organisms risks. 

BACTERIA + FUNGI

.

BACTERIA + FUNGI : Water and air tightness according to EN374-2:2014.